Different Types of Waterproofing Solutions

 Waterproofing is a behind-the-scenes thing that benefits everyone from young children to the elderly. Reports have shown that waterproofing is only 1% of the advancement cost of the design yet at whatever point ignored it will in general be liable for essentially 90% of the damage Waterproofing framework gives security to the construction from water entrance. The act of waterproofing traces all the way back to the time when the different procedures utilized were bituminous, metallic sheet, polyurethane-put together thus with respect to.

I want to share with you a variety of waterproofing solutions that are mostly used for construction and repair which definitely helps you to avoid waterproofing failures. In addition, poor quality materials and workmanship, incorrect waterproofing chosen for a particular problem / site is another major cause of waterproofing failure.




Where to use which kind of Waterproofing Solutions

Areas of Waterproofing is Needed;

  • The basement of the building

  • Kitchen, Toilet, and Bathroom

  • Balcony areas

  • Roof /Terrace

  • Swimming Pool

  • Water Tank

Waterproofing is the prevention of the entry of water and vapor. It is useful to fill and move structural cracks. This applies to positive priorities. There are different types of waterproofing. Liked. Sheet membrane, liquid, bentonite, cementation. That is why it is so important to choose the best method of waterproofing. Some types of waterproofing are given below. 

Cementitious Waterproofing

Semantic products are probably the easiest waterproof material to use. They are readily available from suppliers of porcelain products and are easy to mix and apply.If you plan to use this material, a long handled brush makes your life easier.  Also, spend extra money to buy acrylic additives to mix into the cement product.  You will get a coating that is better bonded and more solid, durable but. 


The main disadvantage is that they are not given cement products because perhaps the cement does not stretch to any significant extent. They will stand up well to the water head but will not tolerate almost any joint or crack movement.

Cementitious waterproofing is the most widely used form of Waterproofing solutions. It is mainly used in underwater areas such as toilets and kitchens, terraces , and basements, etc. Although semantic waterproofing is recommended for submerged areas, there are many failures due to low quality chemicals and poor workmanship. Most cementitious coatings are not flexible; In fact, some are more rigorous.

Cementitious waterproofing is used in the following type of structures:

  • Water treatment plants

  • Sewage treatment plants

  • Lake

  • To endure

  • Railway and subway systems

  • Marine cargo ports and docks

  • River lock / channel and concrete dykes

  • Parking structure and more

  • Tunnel

Liquid waterproofing membrane

Liquid roofing is an expert liquid roof coating that is used to make the roof waterproof.  It is suitable for all types of roofs including flats, pits and domes. Liquid roofing involves the application of a monolithic, fully binding, liquid-based coating to the roof. The coating is a flexible waterproof coating layer like rubber. When the layer is stretched, it returns to its original shape. Such coating systems are usually reinforced with secondary materials such as glass-reinforced plastics to provide additional tensile strength. Coatings can be applied to most traditional roofing materials, including felt, asphalt, bitumen and concrete. 


The liquid roofing process provides a cost-effective method of making new or existing roofs waterproof. It can give performance up to 25 years depending on the coating system. It is estimated that a liquid roof is 70% less expensive than a total roof replacement in terms of renovation.

Bituminous waterproofing

Bituminous waterproofing systems are designed to protect residential and commercial buildings. Bitumen (tar or coal-tar pitch) is an alloy made from organic matter that is highly viscous, viscous and waterproof. These systems are sometimes used in the form of roofing, roofing or roll roofing products.

Bituminous coating waterproofing method

Bituminous coating is a type of coating used for waterproofing and flexible protective coating. It is an excellent protective coating and waterproofing agent, especially on surfaces such as concrete foundations. 

Bituminous membrane waterproofing method

Bituminous membrane waterproofing is a popular method used for low-slope roofs due to their proven performance. 

Polyurethane waterproofing

Polyurethane is made up of two components, the base and the reactor. While acting as a polyol base, isocyanide is a reactor component. The combination of these two in specific design ratios creates a liquid coating for waterproofing applications. Polyurethane is a popular option due to its ease of installation. Unlike other waterproofing systems such as sheet membrane and liquid applied membrane, this polyurethane application requires relatively little skill and maintenance. The application is fast and this type of treatment can also be used for post-construction applications. 


Protexion is a waterproofing solution systems company in Nashik and our waterproofing systems prevent moisture from entering walls and floors, ideal for water resistant paint basements, concrete coatings and bricks. Whether you want to stop the weather on your walls or you want to protect your floor with a high quality coating, use online waterproofing solutions through manufacturer coating to give a professional finish for roofs, gutters and even pipes. It is used to facilitate the use of products, i.e. the coating can be provided in operation. This will make your surface easier to clean, hide pores, prevent damage and is a cheaper way to decorate the surface. More information about  then Visit http://www.protexion.in/waterproofing-systems.php

Comments